Norge
Tullfri*
- Deras linjer2 norska linjer
87.08.5010 For the vehicles of heading 87.01
Norska tulldata kontrollerade 13 september 2026.
Kod 8708 50 · Nummer 8708
Officiell tulltext
Drivaxlar med differential, även utrustade med andra transmissionsdelar och icke drivande axlar samt delar till sådana, för traktorer, motorfordon för transport av minst 10 personer inkl. föraren, bilar och andra motorfordon konstruerade huvudsakligen för personbefordran, motorfordon för godsbefordran samt motorfordon för speciella ändamål, andra än sådana som är konstruerade huvudsakligen för person- eller godsbefordran
Välj den beskrivning som passar din vara bäst.
Importtull på koderna nedan: 3.5–4.5%*
5 koder under den här
Prova ett kortare ord, eller sök i hela tulltaxan i stället.
Det här är uppsamlingskoden under 8708: den täcker det som de övriga koderna nedanför inte täcker.
Försäljning till Norge, Storbritannien och USA
Norge, Storbritannien och USA har egna tulltaxelinjer under det 6-siffriga HS-numret. Satserna nedan är det deras tullmyndigheter tar ut på varor som kommer från EU. Stäm av varorna mot varje lands egen ordalydelse innan du förlitar dig på en sats.
Norge
Tullfri*
87.08.5010 For the vehicles of heading 87.01
Norska tulldata kontrollerade 13 september 2026.
Storbritannien
Från 0.0 % till 4.0 %*
8708 50 20 15 Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive
Nordirland följer andra regler.
Brittiska tulldata kontrollerade 13 september 2026.
USA
15.0%†
Bedömd utifrån offentliggjorda amerikanska åtgärder
8708.50.11.10 Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles
Den amerikanska importören lämnar in tulldeklarationen.
Amerikanska tulldata kontrollerade 16 september 2026.
Norge delar upp den 6-siffriga kategorin på sitt eget sätt, så det här är Norges egna rader under den, inte den här EU-koden. Stäm av din vara mot deras ordalydelse; vad norska tullen tar ut visas per rad.
87.08.5010
For the vehicles of heading 87.01
87.08.5090
Other
Innehåller data från norska tullen (data.toll.no), licensierad under CC BY 4.0, anpassad för visning.
Så här mycket tar brittiska tullen ut när varor som dessa anländer till Storbritannien.
8708 50 20 15
Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened
8708 50 20 18
Propeller shaft for torque transmission from the gearbox to the rear axle, consisting of: -two cardan rods, -central universal joint, -central bearing with suspension in a plastic cover, -universal joints on both ends of the shaft, -slip, tube and end yokes, -of a length of 1,4 m or more but not more than 2,4 m, for use in the production of goods of Chapter 87
8708 50 20 20
Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle - of a length of 1 m or more but not more than 2 m, - of a weight of 6 kg or more but not more than 9 kg
8708 50 20 25
Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %, -forged, turned, milled and hardened
8708 50 20 35
Inboard constant velocity joint tripod housing, with: -an outer diameter of 67,0 mm or more but not more than 99,0 mm, -3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm, -an external spline with 21 teeth or more but not more than 41, -forged, turned, rolled and hardened
8708 50 20 50
Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (ABS) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87
8708 50 20 55
Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm, -forged, turned, broached and hardened
8708 50 20 70
Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with: -an outer diameter of 67,0 mm or more but not more than 84,5 mm, -3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm, - sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle, -spline with 21 teeth or more but not more than 35, -bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves
8708 50 20 75
Constant velocity joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of: - an inner race with 6 ball tracks or more but not more than 8 for running with the bearing balls with a diameter of 13,0mm or more but not more than 28,0mm, - an outer race with 6 ball tracks or more but not more than 8 for running with the bearing balls, made of steel with carbon content of 0,45% or more but not more than 0,58%, with thread and with a spline with 22 teeth or more but not more than 44, - a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14% or more but not more than 0,55%, and - with a grease compartment, - capable of working at constant speed at variable articulation angle not higher than 52 degrees
8708 50 20 80
Specific pre-assembled or ready-to assemble sections for new mobile cranes
8708 50 20 90
Other
8708 50 35 11
Specific pre-assembled or ready-to assemble sections for new mobile cranes
8708 50 35 90
Other
8708 50 55 11
Specific pre-assembled or ready-to assemble sections for new mobile cranes
8708 50 55 20
Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (ABS) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87
8708 50 55 50
Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened
8708 50 55 91
Specific pre-assembled or ready-to assemble sections for new mobile cranes
8708 50 55 99
Other
8708 50 91 10
Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (ABS) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87
8708 50 91 11
Specific pre-assembled or ready-to assemble sections for new mobile cranes
8708 50 91 90
Other
8708 50 99 10
Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle - of a length of 1 m or more but not more than 2 m, - of a weight of 6 kg or more but not more than 9 kg
8708 50 99 25
Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with: -an outer diameter of 67,0 mm or more but not more than 84,5 mm, -3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm, - sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle, -spline with 21 teeth or more but not more than 35, -bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves
8708 50 99 35
Constant velocity joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of: - an inner race with 6 ball tracks or more but not more than 8 for running with the bearing balls with a diameter of 13,0mm or more but not more than 28,0mm, - an outer race with 6 ball tracks or more but not more than 8 for running with the bearing balls, made of steel with carbon content of 0,45% or more but not more than 0,58%, with thread and with a spline with 22 teeth or more but not more than 44, - a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14% or more but not more than 0,55%, and - with a grease compartment, - capable of working at constant speed at variable articulation angle not higher than 52 degrees
8708 50 99 40
Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (ABS) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87
8708 50 99 45
Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %, -forged, turned, milled and hardened
8708 50 99 50
Inboard constant velocity joint tripod housing, with: -an outer diameter of 67,0 mm or more but not more than 99,0 mm, -3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm, -an external spline with 21 teeth or more but not more than 41, -forged, turned, rolled and hardened
8708 50 99 60
Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm, -forged, turned, broached and hardened
8708 50 99 70
Specific pre-assembled or ready-to assemble sections for new mobile cranes
8708 50 99 90
Other
Tullsatserna gäller i Storbritannien, alltså England, Skottland och Wales. För varor som förs in i Nordirland kan andra regler gälla.
Innehåller information från offentlig sektor som är licensierad under Open Government Licence v3.0.
Källa: UK Department for Business and Trade (data.api.trade.gov.uk).
Det som amerikansk tull tar ut när varor som dessa anländer från EU. Den amerikanska importören lämnar in tulldeklarationen och betalar tullen.
8708.50.11.10
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, For tractors (except road tractors), For tractors suitable for agricultural use, Drive axles with differential, whether or not provided with other transmission components
8708.50.11.50
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, For tractors (except road tractors), For tractors suitable for agricultural use, Non-driving axles
8708.50.31.10
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, For tractors (except road tractors), For other tractors, Drive axles with differential, whether or not provided with other transmission components
8708.50.31.50
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, For tractors (except road tractors), For other tractors, Non-driving axles
8708.50.51.10
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, For vehicles of heading 8703, Drive axles with differential, whether or not provided with other transmission components
8708.50.51.50
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, For vehicles of heading 8703, Non-driving axles
8708.50.61.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, For other vehicles, Drive axles with differential, whether or not provided with other transmission components
8708.50.65.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, For other vehicles, Non-driving axles
8708.50.70.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For tractors (except road tractors), For tractors suitable for agricultural use
8708.50.75.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For tractors (except road tractors), For other tractors
8708.50.79.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For vehicles of heading 8703, Parts of non-driving axles
8708.50.81.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For vehicles of heading 8703, Other, Of cast iron
8708.50.85.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For vehicles of heading 8703, Other, Half-shafts
8708.50.89.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For vehicles of heading 8703, Other
8708.50.91.10
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For other vehicles, Parts of non-driving axles, Spindles
8708.50.91.50
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For other vehicles, Parts of non-driving axles, Other
8708.50.93.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For other vehicles, Other, Of cast iron
8708.50.95.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For other vehicles, Other, Half-shafts
8708.50.99.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For other vehicles, Other
Antidumpingtull, utjämningstull, amerikanska importavgifter och tullavgifter räknas inte in.
Beskrivningarna ovan är de amerikanska tarifftexterna, som USA bara publicerar på engelska.
Källa: den amerikanska tulltaxan från US International Trade Commission (hts.usitc.gov), public domain, och de åtgärder som offentliggjorts i Federal Register.
Det här är en planeringsuppskattning utifrån den amerikanska tulltaxan (revisionen är angiven) och de åtgärder som offentliggjorts i Federal Register per det angivna datumet, för en sändning med ursprung i EU. Det är inte en tulldeklaration, juridisk rådgivning eller ett tullombuds bedömning, och tullkoder.se är inte ett amerikanskt auktoriserat tullombud. Den amerikanska importören eller dess tullombud bekräftar klassificeringen, ursprunget, värdet och tullen som ska betalas innan deklarationen lämnas in.
Tullsatserna här är uppskattningar, avlästa ur officiella tulltaxedata från EU, Norge och Storbritannien och bara till orientering. Kontrollera den aktuella satsen hos Tullverket, TARIC, norska tullen eller brittiska Online Trade Tariff innan du deklarerar. Satsen du betalar kan också bero på varans ursprungsland. Det här är grundtullsatser: importmoms, punktskatter, antidumpningstullar samt skydds- och kvotåtgärder ingår inte.
Skapa ett gratiskonto för att samla de tullkoder du behöver på ett ställe och komma tillbaka till dem när du vill.