Plattor, duk, film, folier och remsor av polyetentereftalat, inte porösa och inte förstärkta, laminerade eller på liknande sätt kombinerade med annat material, obearbetade eller endast ytbehandlade, oskurna eller endast nedskurna till kvadratisk eller rektangulär form (exkl. självhäftande samt golvbeläggningsmaterial, vägg- eller takbeklädnad enligt nr 3918)

3920 62 12 00

Poly(ethylene terephthalate) film, of a thickness of 72 micrometres or more but not exceeding 79 micrometres, for the manufacture of flexible magnetic disks; poly(ethylene terephthalate) film, of a thickness of 100 micrometres or more but not exceeding 150 micrometres, for the manufacture of photopolymer printing plates

3920 62 19 05

Poly(ethylene terephthalate) film in rolls: - with a thickness of 0,335 mm or more but not more than 0,365 mm, and - coated with a gold layer with a thickness of 0,03 μm or more but not more than 0,06 μm

3920 62 19 08

Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25 µm, either: - only dyed in the mass, or - dyed in the mass and metallised on one side

3920 62 19 28

Non-transparent poly(ethylene terephthalate) film: -each outer layer with a thickness of 7 nm or more but not more than 80 nm, -with a tensile strength of 300 N/cm or more (ASTM D-882), -with a total thickness of 200 µm or more but not more than 350 µm, and -with a width of 600 mm or more but not more than 1 600 mm - covered on one side with a layer of a fluoropolymer, and on the other side with an adhesive and a layer of polyvinylidene difluoride, or coated on both sides with polyvinylidene difluoride or polyvinyl fluoride based on fluorinated polymer composites

3920 62 19 32

Transparent poly(ethylene terephthalate) film: -having thickness of both sides of 7 nm or more but not more than 80 nm, or thickness of both sides of 7 µm or more but not more than 80 µm, whether coated with an acrylic-based organic material or not, -with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm, or transparent 3 or 4 layers, second layer of PET, and other layers contain fluorine resin, -with a light transmittance of more than 70 %, -with a haze value of not more than 1,3 %, -with a total thickness of 10 µm or more but not more than 350 µm, -with a width of 800 mm or more but not more than 1 600 mm

3920 62 19 38

Poly(ethylene terephthalate) film, of a thickness of not more than 12 µm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm

3920 62 19 48

Sheets or rolls of poly(ethylene terephthalate): - coated on both sides with a layer of epoxy acrylic resin, - of a total thickness of 37 μm (± 3 μm)

3920 62 19 52

Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1|% of aluminium, of a thickness of not more than 300|µm and having a surface resistivity of not more than 10|000|ohms (per square) (as determined by the ASTM D 257|method)